Step 1. Turn off water supply to water heater. Rotate knob of combination thermostat/gas valve to “OFF” position. Step 2. Turn off cold water supply…

Step 1. Rotate the knob of combination thermostat/gas valve to “OFF” position. Step 2. Turn off cold water supply to the water heater. Connect a…

Step 1. Rotate knob of combination thermostat gas valve to the off position. Step 2. Remove the outer jacket door. Step 3. Remove inner door…

Step 1. Rotate the knob of combination thermostat/gas valve to the “OFF” position. Step 2. Remove the outer jacket door. Step 3. Disconnect the wire…

Step 1. Remove the outer jacket door. Step 2. Disconnect the wire leads from the resettable thermal switch. Step 3.Using a multimeter capable of measuring…

At periodic intervals (not more than 6 months) a visual inspection should be made of the main burner for proper operation and to ensure no…

Step 1. Rotate knob of the gas control to the “OFF” position. Step 2. Turn off gas supply to the water heater. Step 3. Disconnect…

Step 1. Set the gas control knob to the “OFF” position. Turn off inlet water supply to water heater. Step 2. Draw approximately 4 gallons…

Step 1. If control has gone into lockout due to excessive tank temperature (four flashes, three second pause), reset control by rotating gas control knob…

Step 1. Disconnect the burner and pilot tubes per Service Procedure RG-II. Step 2. Remove the valve body by removing the screw located at the…